Facebook-icon2 twitter-icon2 skype-icon2

Tekni Tronics

 

 

          Electronic Assembly & Wiring Specialists       01342 716907

roclogoc Rounded square

SMD Assembly

Where components are to be placed, the printed circuit board normally has flat, usually tin-lead, silver, or gold plated copper pads without holes, called solder pads. Solder paste, a sticky mixture of flux and tiny solder particles, is first applied to all the solder pads with a stainless steel or nickel stencil using a screen printing process. We use a Dima Dispense Master or  a Mechatronika dispensing machine to remove screen costs. After pasting, the boards then proceed to our Mechatronika pick-and-place machines. The components to be placed on the boards are usually delivered to the production line in either paper/plastic tapes wound on reels or plastic tubes. Some large integrated circuits are delivered in static-free trays. Numerical control pick-and-place machines remove the parts from the tapes, tubes or trays and place them on the PCB.

The boards are then conveyed to the Gold reflow soldering oven. They first enter a pre-heat zone, where the temperature of the board and all the components is gradually, uniformly raised. The boards then enter a zone where the temperature is high enough to melt the solder particles in the solder paste, bonding the component leads to the pads on the circuit board. The surface tension of the molten solder helps keep the components in place, and if the solder pad geometries are correctly designed, surface tension automatically aligns the components on their pads. There are a number of techniques for reflowing solder. In cases of particular difficulties we use inerting nitrogen to stabilise reflow.

Rounded square Rounded square Rounded square

About

Services

Contact